|
DIRECTIONS FOR USE: Shake well before use. Use as is, do NOT dilute.
SURFACE PREPERATION: First Clean Teak Deck Surfaces using Clean A Teak Wash – 1 Thoroughly as directed.
APPLICATION: Apply Clean A Teak Brightener – 2 UNDILUTED onto wet Teak Deck surfaces spread evenly over entire Teak surface Allow to soak deep into Teak surface for approx. 2 minutes, then rinse/wash off thoroughly with Fresh water.
IMPORTANT NOTICE:
Keep Teak Decks wet at all times during Clean A Teak Brightener – 2 Treatment. (DO NOT allow Teak surface to Dry during Treatment)
When Cleaning is complete as above Directions, apply Clean A Teak Seal’N’Protect as Directed.
CLEANUP: Be sure to rinse ALL adjacent surfaces & lower deck areas thoroughly with Fresh water.
SAFETY DIRECTIONS: Keep out of Reach of Children. Store in a safe cool Place. Wear suitable safety clothing & equipment when using this product.
Hand Protection (water proof gloves), Eye Protection (Goggles, Glasses), Feet Protection (Water Proof Boots). Harmful if in contact with skin, eyes, & if swallowed. Use in a well ventilated area, harmful to respiratory tract.
Avoid Contact with Skin & Eyes.
Do not eat food or drink when using this product.
FIRST AID: If Swallowed, Do Not Induce vomiting, give large quantities of Milk or limewater. For advice contact a poisons information centre (Phone 13 11 26 in Australia) or a Doctor. If in Eyes wash out immediately with running water for at least 15 minutes. If Skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. For further information Refer to MSDS.
|
